Terms and conditions
Version dated 18 November 2026. Working draft, to be reviewed by a lawyer before publication.
Article 1 · Identity and scope
FlipCover is the trading name of MEZLINE SRL, Leuvensesteenweg 246/1, 1930 Zaventem, CBE 1010.517.195 ("FlipCover").
These terms apply to all our quotes, orders and installation work of architectural adhesive films. They distinguish between the consumer (a person acting for private purposes) and the business customer (company, self-employed person, association). A business customer's own terms only apply if FlipCover accepts them in writing.
Article 2 · Estimate, final quote and contract
The estimate based on your photos is free, without obligation and indicative. The final price depends on the actual measurements and the condition of the surfaces, checked during the measuring visit.
The final quote is free and valid for 30 days. For stairs, it is based on the photos and information provided by the customer; the price is adjusted if the staircase differs from what was declared.
The contract is formed by the written acceptance of the final quote (signature, agreement by e-mail or online) and payment of the deposit. Additional work is only carried out after your written agreement on its price.
Article 3 · Prices and VAT
Prices for consumers include 21% VAT. Prices for business customers exclude VAT. If the statutory VAT rate changes before invoicing, the rate in force at that time applies.
For consumers, the price of an accepted final quote cannot be changed unilaterally. For business customers, if the price of the films rises by more than 10% between acceptance and installation, FlipCover may adjust the price on presentation of evidence; the customer may then cancel the order free of charge.
Travel for the measuring visit is free.
Sample pack. The client can order a pack of 1 to 3 samples online for €6.90 including VAT, delivery in Belgium included. The pack is paid when ordering (card, Bancontact or Apple Pay, through our payment provider Stripe) and sent within 5 working days of payment. If the client accepts a final quote from FlipCover within 6 months of paying for the pack, this amount is deducted from the total price.
Article 4 · Deposit, ordering of films and lead times
A deposit of 30% of the total price is requested when the final quote is accepted. The films are ordered once the deposit is received, and the installation date is then agreed together. Allow 2 to 4 weeks in general.
Lead times are indicative. A delay gives no right to compensation or cancellation, except in the case of an unreasonable delay after formal written notice giving a reasonable period. If a finish is no longer available, FlipCover offers a new date or an equivalent finish; if the customer declines both, they may cancel free of charge and the deposit is refunded within 14 days.
Article 5 · Right of withdrawal (consumers)
Where the contract is concluded at a distance (e-mail, phone, WhatsApp, online) or off-premises (at your home), the consumer has 14 calendar days from the conclusion of the contract to withdraw, without giving a reason and at no cost. Simply notify us at info@flipcover.be, for example using the form in the appendix. The deposit is refunded within 14 days, using the same means of payment.
If the consumer wants FlipCover to order the films or start the work before the end of this period, they must expressly request this in writing (an e-mail is enough). If they then withdraw, they pay the cost of the films already ordered at their request and, where applicable, an amount proportionate to the work already carried out. Once the work has been fully performed at their request, the right of withdrawal ends.
For the sample pack, the 14-day period runs from receipt of the pack. A consumer who withdraws returns the samples at their own expense within 14 days of their notice. The €6.90 is refunded within 14 days of the withdrawal, using the same means of payment; FlipCover may wait until it has received the returned samples.
Article 6 · Postponement and site not ready
The installation date may be moved or cancelled free of charge up to 48 hours before the appointment.
After that, or if the installation cannot take place for a reason attributable to the customer (absence, room not accessible, surfaces not cleared, other work in progress, dust), a flat fee of €75 is due. The new appointment is set once it has been paid.
If FlipCover moves the installation less than 48 hours in advance without force majeure, the customer receives a €75 discount on their invoice.
Article 7 · Cancellation of the order
After the withdrawal period, or for a business customer, a customer who cancels their order owes a fixed compensation of 15% of the total price. If the cost of the films already ordered for their project is higher, that actual cost is due instead. The compensation is deducted from the deposit; any balance is refunded within 14 days.
If FlipCover cancels the order without valid reason, it pays the customer the same 15% compensation and refunds the deposit.
Article 8 · Customer obligations
For the installation to go smoothly, the customer:
- provides free and safe access to the surfaces, with electricity and lighting, and if possible a parking space nearby;
- clears the surfaces and worktops; cupboards do not need to be emptied if only the fronts are covered;
- ensures the room is clean, dry, dust-free, heated to at least 15 °C and without other work in progress (painting, sanding, plastering);
- has appliances and connections (electricity, water, gas) disconnected if necessary by a professional of their choice; FlipCover removes and refits handles, hinges and simple parts;
- reports in advance any known damage, repairs or specific features of the surfaces;
- is present, or represented, at the start of the work and at the handover.
If these conditions are not met, Article 6 applies.
Article 9 · Condition of the surfaces
The film follows the surface it is applied to: existing dents, scratches, chips, joints and unevenness may remain visible. FlipCover checks the surfaces during the measuring visit and points out those that are not suitable (peeling paint or veneer, damp, swollen, porous or too soft surface).
If the customer nevertheless asks for installation on a surface advised against, it is done at their own risk and the adhesion and appearance warranty does not apply to those parts. Removing an old film or covering may pull off paint, varnish or veneer from a fragile substrate; this risk is pointed out in advance and is borne by the customer, unless FlipCover is at fault.
Article 10 · Colours and appearance
Samples, photos and screens give an idea of the finish. Slight differences in colour or texture between a sample and the delivery, or between two production batches, are normal. Joints required by the roll width or the shape of the elements are unavoidable; FlipCover places them as discreetly as possible.
Article 11 · Performance
FlipCover carries out the work with its own installers, with care, in accordance with good practice and the film manufacturer's instructions.
Article 12 · Handover
At the end of the installation, FlipCover and the customer review the result together. Signing the handover form, or agreeing by e-mail, constitutes acceptance of the work for defects visible at that time. Any remarks are noted on the form and corrected on an agreed date.
Article 13 · Complaints
A visible defect not noticed at handover must be reported within 8 days of installation. A hidden defect, or one that appears later, must be reported within 2 months of its discovery. Complaints are made by e-mail to info@flipcover.be or via WhatsApp, with photos.
A defect is assessed from a distance of at least 2 metres, facing the surface, under normal lighting, without grazing light or magnifying glass. A small imperfection not visible under these conditions is not a defect; edges and technical joints are assessed with more tolerance.
A complaint does not suspend payment of the undisputed part of the invoice. A justified complaint results in a free repair or replacement, on an agreed date.
Article 14 · Warranties
Consumers benefit from the 2-year statutory guarantee of conformity. FlipCover adds:
- Installation: 5 years, stairs included. Covers peeling, bubbles and adhesion defects caused by the installation. Materials and labour free of charge.
- Film: 10 years, manufacturer's warranty against manufacturing defects. During the first 5 years, materials and labour are free. After that, the defective film is replaced free of charge; labour may be charged.
The warranties run from the installation date and transfer to the new owner if the property is sold.
They do not cover: knocks, cuts, scratches and burns; contact with a strong heat source; unsuitable cleaning (abrasive products, solvents, steam cleaner); permanent humidity or standing water; normal wear and tear; a surface reported as unsuitable (Article 9) or that deteriorates (swelling furniture, damp wall, peeling paint); work by third parties or changes made without FlipCover's agreement. Details and care tips are on the page Warranty and care.
Article 15 · Payment
The balance is invoiced on the day of installation. The invoice is sent by e-mail with an online payment link; bank transfer is also possible. It is payable within 8 days. A business customer disputing an invoice must do so in writing, with reasons, within 8 days of receipt.
Article 16 · Late payment
Consumer : if payment is not made by the due date, FlipCover sends a first free reminder giving at least 14 calendar days. After that period, the following are due by operation of law: interest at the rate set by the Act of 2 August 2002 and a fixed compensation of €20 for a balance up to €150; €30 plus 10% of the part between €150.01 and €500; €65 plus 5% of the part above €500, up to a maximum of €2,000. If FlipCover is late in refunding an amount owed to the consumer, the same interest and compensation apply in the consumer's favour. Business customer : any invoice unpaid on the due date bears, by operation of law and without notice, interest at the rate set by the Act of 2 August 2002, a fixed compensation of €40 for recovery costs and a compensation of 10% of the unpaid amount. After formal notice without effect, FlipCover may suspend work in progress.Article 17 · Retention of title and risk
Films delivered but not yet installed remain the property of FlipCover until the price has been paid in full. Risk passes to the customer on delivery or installation.
Article 18 · Liability
FlipCover's liability is limited to the repair or replacement of the defective work or, if that is not possible, to the amount invoiced for that work, or to the amount covered by its professional liability insurance (KBC) if higher.
Towards a business customer, FlipCover is not liable for indirect damage (loss of turnover, business interruption, loss of customers). FlipCover is not liable for damage caused by inaccurate information from the customer or to items the customer did not clear away.
These limitations do not apply in case of fraud, gross negligence, personal injury or failure to perform the main obligation of the contract.
Article 19 · Force majeure
In the event of an unforeseeable event beyond the parties' control (illness of the installer, supplier shortage, extreme weather, strike, pandemic), performance is suspended without compensation and a new date is offered. If force majeure lasts more than 3 months, either party may terminate the contract free of charge; amounts paid for work not carried out are refunded. Between businesses, Article 5.74 of the Civil Code (hardship) does not apply.
Article 20 · Photos of completed projects
FlipCover only photographs or publishes the result (website, social media, advertising) with the customer's separate consent, given by ticking a box on the final quote. No address and no recognisable person is shown. This consent may be withdrawn at any time by e-mail; the publications concerned are then removed within a reasonable time.
Article 21 · Personal data
The customer's data is processed in accordance with our privacy policy.
Article 22 · Disputes and governing law
Any complaint should first be sent to info@flipcover.be, so that we can find a solution together. Failing that, the consumer may contact the Consumer Mediation Service free of charge (consumerombudsman.be).
Belgian law applies. For business customers, the courts of the judicial district of Brussels have exclusive jurisdiction. For consumers, the court designated by law has jurisdiction.
Article 23 · Final provisions
If a clause is declared void, the others remain valid and the void clause is replaced by a valid clause as close as possible to its purpose. An e-mail counts as written form. The applicable version is the one in force when the quote is accepted. These terms exist in French, Dutch and English; in case of any difference, the French version prevails.
Appendix · Model withdrawal form
Complete and return this form only if you wish to withdraw from the contract. You may also copy this text into an e-mail.
To MEZLINE SRL (FlipCover), Leuvensesteenweg 246/1, 1930 Zaventem, info@flipcover.be
I hereby give notice that I withdraw from the contract for the sale of the following goods or for the following service:
Quote number: ……………………………
Date the quote was accepted: ……………………………
Name of consumer: ……………………………
Address of consumer: ……………………………
Date: ……………………………
Signature (only if sent on paper): ……………………………